M-Series 40W 24VDC Magnetic Phase Dimmable LED Driver, Class 2, 120V

Magnitude Lighting M-Series 40W LED Driver — 24V DC

M40L24DC-AR is a 40W LED Driver with 120VAC input and 24V DC Constant Voltage output for 24V LED tape, tube, and linear lighting. It is phase dimmable using a leading (forward) edge MLV TRIAC dimmer only and is listed as Class 2. The coated metal housing is an Integrated Junction Box with multiple 7/8 in. knockouts for streamlined installation.

Key Features

• Power: 40W max load
• Input Voltage: 120VAC ± 5%, 50/60Hz
• Output Voltage: 24VDC constant voltage
• Dimming: Phase dimmable, leading (forward) edge MLV TRIAC dimmer only
• Minimum Dimming Level: 1%
• Dimensions: 5.60 in. L x 2.00 in. W x 2.14 in. H
• Enclosure Type: Integrated Junction Box, coated metal, multiple 7/8 in. knockouts, 2-hole flange mount
• Environmental: Dry & Damp
• Class 2: Yes
• Certifications: ETL Listed; Conforms to UL STD 2108; C22.2 NO. 223

Physical Design & Installation

Coated metal enclosure with an Integrated Junction Box and multiple 7/8 in. knockouts for conduit entry and wiring compartment access. Mounts via 2-hole flange mount; maintain 5 in. minimum installation spacing as specified.

Dimming & Controls

Phase dimming is supported with a standard leading (forward) edge MLV TRIAC dimmer only. Dimming performance is specified down to 1% minimum dimming level. Input is 120VAC ± 5% at 50/60Hz; output is 24VDC constant voltage for compatible 24V LED loads.

Performance & Build

Built-in primary and secondary auto-reset circuit breakers provide protection for the driver and connected LED load. Rated Class 2 and designed for dry and damp environments with an operating temperature range of -30°C to +45°C.

Typical Applications

• 24V LED tape and undercabinet lighting
• Linear and tube-style LED fixtures requiring 24VDC constant voltage
• Residential and commercial dimmable accent lighting
• Damp-location installations where a junction-box style driver is preferred