Brewing Accessories All Stainless Steel Low Profile Keg Coupler w/PRV Space Saving Beer Keg Connector D/S System 1/4" Barb Beer Out 3/8" Barb Gas in Brewing Accessories(D System Coupler)

Keg coupler - 304 Stainless Steel body & ProbeA Keg Coupleris a key element of any draft beer system The keg coupler's job is to connect your CO2 tank to the keg so the gas can push the beer up through the beer line. The bottom of the coupler attaches to the keg valve, and the beer line and air line slide over the horizontal hose nipples and secured with screw clamps.With 100% stainless-steel contact, you can be sure that this beer coupler will last for a very long time, and that unwanted chemicals will not enter your beer and taint its quality.Excellent for beer, wine and ciderThis keg coupler and probe are made out of 304 stainless steel.Gas Inlet Connection: 3/8"O.D. Barb(to fit 5/16"I.D. gas hose)Beer Outlet Connection: 1/4" O.D. Barb(to fit 1/4" I.D. beer hose)Type S Low ProfileThis Keg Coupler is a high quality tap for those tight installations. It is superior quality tap and this low profile is ideal for tight keg rooms where space is a premium. With standard keg couplers, you need a few inches of clearance above the top of your keg. But with a low-profile design, this keg coupler only sticks up about ¾ inch above the rim of the keg. So you'll have an easier time installing and operating your keg setup in limited space.This handy beer coupler is a great choice for both home and commercial bars.Dimensions:Height: 2.345"Width: 4.785" (Barb to Barb)Stainless SteelbodyStainless Steel probeLiquid Barb inlet for 5/16" Inside Diameter beer hoseGas Barb outlet for 1/4" Inside Diameter gas hose==========Hign-concerned Chemical : NoneFeature : Eco-FriendlyQuantity : 1 pcsBar Accessories Type : Keg PostCertification : CIQMaterial : STAINLESS STEEL

• Feature : Eco-Friendly
• Quantity : 1 pcs
• Bar Accessories Type : Keg Post
• Certification : CIQ
• Material : STAINLESS STEEL